|
| |
|
|
The second generation power module from ABL
Designed in response to Customer feedback. The end of down time and inconvenience when Fuses fail in Desk Power modules.
KONSORT 2 and KONNECTIVE 2 have a unique benefit: A spare fuse incorporated in EVERY socket!
Helps overcome common problems such as Desk Sockets being used for Vacuum Cleaners and other ‘Non Office Equipment’ appliances that are overrated.
Simply pull out the integral fuse holder (similar to ordinary 13A plugs) the first fuse revealed is the SPARE fuse, the second or lower fuse is the working fuse. If the fuse has failed then simply replace the working fuse with the spare (after rectifying the fault that caused the fuse to fail) and your power socket will
be working again. Remember to order spare fuses to replace the one used!
In addition the range now has the added benefit of inline through housing fixings.
This enables KONSORT 2 to screw onto aluminium channels and other areas where in line fixing is required and improves the integrity of the fixing. Fixings are also concealed for aesthetic purposes and to inhibit unauthorised removal or tampering with the fixing. Common fixing centres make life easier - one set fits all Power modules.
- The new range of power
modules from ABL.
Available in popular combination covering 2, 3, 4, 5, and 6 Gang configurations. Switched
and unswitched modules are available as shown
below
- Each module may be
directly linked to another - including Data
Housings (see here) to achieve even more
complicated requirements quickly, easily and
cost effectively.
Each Socket is individually fused at either
3.15A or 5A
- These modules are manufactured
and certified to BS 5733 and will enable installations
to meet the electrical requirements of BS 6396 when installed and tested correctly
|
Place
your mouse over the images below to show products
from this range |
| |
|
|
|
